This site is supported by partnerships with various hardware and softare vendors. I receive commissions on purchases made through our links to retailers. 

DXO Photo Lab 4 vs Luminar V4 – Sharpening

by | Oct 30, 2020 | Photo Software Reviews, DXO Photo Lab, Luminar 4 | 1 comment

This is the second in a series of posts comparing DXO Photo Lab 4 and Luminar 4. Click here for the next in the series.

In my last post and video, I looked at DXO Photo Lab version 4 versus Luminar version 4. My test was an end to end development of a RAW image. Both tools did well.

Today, I am focusing on a very specific RAW conversion step – sharpening. Sharpening is best done in several steps. First, the image needs sharpening during the RAW conversion. Second, we should sharpen it after post processing. Last, we should sharpen the image after resizing for its target medium – either for on screen viewing or for printing.

Getting the sharpening done correctly is essential. Too much, too soon is as bad as too little too late. Traditional sharpening tools, such as the ubiquitous unsharp mask, are too general and are usually global, affecting the entire image.

RAW converters that only offer unsharp mask sharpening do not, therefore, have any real advantage over traditional photo editors, such as Photoshop or Affinity Photo.

DXO Photo Lab has very sophisticated sharpening – it has sharpening profiles that match your camera and lens and its RAW sharpening targets areas where your lens is soft, typically the corners and edges. Luminar features tools for sharpening: AI Structure and Details Enhancer and a regular Unsharp Mask tool. Let us see how they compare.

Read on below, or watch the video…

The Test Photo

The image I am using has plenty of detail in it and I took it with a Canon EF 16-35 F/4L lens at 35MM, F8. It’s already a sharp lens so, ironically, here I have to be careful to not overdo the sharpening.

Here’s the Photo – because of the brightness of the sky, the foreground is a little dark. The RAW converters can brighten the foreground up a little. It is definitely a challenge for the converters – both over and under exposure to correct.

The Test Image

DXO vs Luminar The Test Image

DXO Photo Lab Settings

First, I open the image up in DXO Photo Lab 4. I have turned off every setting apart from its Lens corrections and Smart Lighting, which has brightened up the image a little.

Here are the settings I used:

DXO Settings

Luminar Settings

I have applied its lens correction, but this time only removed the distortion and chromatic aberrations because Luminar cannot automatically correct softness. I manually corrected the vignetting, whereas DXO does that automatically.

I have used its Accent AI to brighten the image just a little. I also used the AI Structure and Detail Enhancer tools, but it took several minutes to figure out the right settings to sharpen, but not over sharpen, the image. This was a painful process when compared to DXO. DXO’s automatic settings were perfect and Luminar’s screen refresh is very slow. This made assessing changes to the settings time consuming. Point to DXO.

Here are the Luminar settings I used:

Luminar Settings

Image Comparison

Interestingly, DXO took 26 seconds to produce the result. Luminar took well over a minute. So, another point to DXO.

Looking at the pictures sized for the screen, they are quite similar. DXO’s Smart Lighting has brought more detail out in the sky, but it would not be fair to award it a point for that. Luminar has a sky enhancement tool that I have not applied yet.

Here are the comparisons at 100%:

And here are a couple of comparisons at 200%

DXO has a tiny edge, especially when viewed at 200% and looking at the edge of the mountain – DXO is cleaner and crisper. Whether you would notice this in the final result, on screen or in print, is another matter.

Areas of the Luminar image are sharper than DXO’s but other areas are not as good. This is the problem with global sharpening. DXO’s sharpening is even across the entire frame, cancelling out the weaknesses of the lens without over-processing the strengths.

So far, I would score this result in DXO’s favour. The results are both good, but DXO was much faster in use. As I said in the previous video, DXO is king with technical RAW conversion.

But what about enhancing this image further? It is dull, and the sky needs work. Check back soon to see how these two tools compare with the artistic side of RAW development.

DXO Photo Lab 4 vs Luminar V4 – Sharpening – Conclusion

This test pitched one of DXO’s major strengths against Luminar’s image detail and sharpening tools. DXO was much faster to use and produced a slightly better result. Not that Luminar is substandard here, rather it is that DXO excels in this area.

DXO Photo Lab 4

Ease of use: 10
Speed: 10
Quality: 10

Luminar 4

Ease of use: 6
Speed: 4
Quality: 8

However, there is far more to RAW conversion than image sharpness. In the next test, I will look at how well each tool deals with fixing the washed out sky. After that, I will test DXO Photo Lab 4 and Luminar 4’s ability to improve the colours and correct the exposure in the foreground…

Current Offers From DXO and Luminar

DXO are offering 30% off Photo Lab 4

Skylum are offering discounts on Luminar AI pre-orders. They have scheduled Luminar AI for release by the end of the year. Luminar AI will add further AI features to Luminar.

Please Support Us

This site supports me and my family.

Please use our links to visit the vendor’s pages. It helps us at no extra cost to you.

Please contribute or send a gift, because that will help me to keep this site active.

All content is Copyright Andy Bell 2024

1 Comment


  1. DXO Photo Lab 4 vs Luminar 4 - Creative Editing - Andy Bell Photography - […] here to see the previous instalment in this […]

Submit a Comment

Your email address will not be published. Required fields are marked *

Related posts

Focus stacking, Luminar NEO, Photo Software Reviews, Photography techniques

Focus Like a Pro: Luminar NEO for Photographers

Focus Like A Pro with Focus Stacking - Luminar NEO tested Focus stacking is a technique used by photographers to achieve a greater depth of field in their images. This method involves taking multiple photos of the same scene, each with a different focus point, and then combining them into a single image with sharpness [...]

|Feb 21, 2024

Luminar NEO, Photo Software Reviews

Unleash Your Imagination: Exploring the Power of Luminar Neo AI for Photographers

Introduction to Luminar NEO AI for Photographers Luminar NEO AI is an impressive photo editing software that incorporates advanced artificial intelligence features. It takes photo editing to a whole new level with its intuitive AI-powered tools. With Luminar NEO AI, editing becomes a breeze as it automatically enhances images, corrects imperfections, and optimizes colors with [...]

|Jan 19, 2024

DXO Photo Lab, DXO Pure RAW
DXO Photo Lab 7

DXO Photo Lab 7 Review

DXO Photo Lab 7 Review This is a look at DXO Photo Lab, a review of its features. This time, I am not comparing it to anything else, although I will refer to comparisons I have made previously, when appropriate. Introduction to DXO Photo Lab 7 DXO Photo Lab 7, which I will simply refer [...]

|Jan 6, 2024

DXO Photo Lab, DXO Pure RAW, Luminar NEO, Photo Software Reviews, RAW Conversion, Skylum Luminar, Software Reviews, Topaz Labs, Topaz Photo AI

The ‘Holy Trinity’ of Photography Software

This blog post looks at the 'holy trinity' of photography software. Three products that, when combined, provide everything you need to develop your RAW images and edit your photos. There is some overlap between the three, as each continues to add to and refine their capabilities. Yet I don't view them as competing with each [...]

|Dec 5, 2023

A.I. Gigapixel, DeNoise AI, DXO Photo Lab, Gigapixel AI, Photo Ninja

Noise Wars – Who Is Winning? DXO Photo Lab 6 vs Topaz Photo AI

Introduction There are only two contenders in the noise wars (IMHO) – DXO Photo Lab and Topaz DeNoise/Photo AI. These two have class leading image noise reduction and I have reviewed them numerous times. Towards the end of 2022, both DXO and Topaz issued new versions of their products. DXO released Photo Lab 6 with [...]

|Jan 21, 2023

A.I. Gigapixel, AB Photo Tools, Digital Image Workflow, Gigapixel AI, Photo Software Reviews
Enlarging a portrait - results

Image Resize Without Losing Quality using Topaz Gigapixel AI

How to do an Image Resize Without Losing Quality Easy! Just put it into Photoshop and do a re-sample, right? Absolutely not! If you are enlarging an image, you face this reality - pixels need to be added and your image's quality will suffer. But only if you use a standard method, such as bicubic [...]

|Jul 24, 2021

Cookie Consent with Real Cookie Banner